Plastic Nylon Cable Gland: Good Sealing, Strong Weather Resistance and Easy Installation

-

Are you still worried about the rotation of the cable connected to the distribution cabinet and the friction with the distribution box to reduce the service life of the cable?

Now, a solution is here.

Cable glands, one of the types of cable accessories,  plays a vital role in cable laying.

The main function is to tighten and seal the cable. Tightening means to lock the cable through the gland, so that the cable does not produce axial displacement and radial rotation, so as to ensure the normal connection of the cable. Sealing refers to the IP protection- dustproof and waterproof.

Typical application examples.

With the increasing variety of cable accessories, it also brings challenges and opportunities to the entire wire and cable industry.

For example, In the process of cable laying, the wires entering the power distribution cabinet must not only be fixed, but also reduce the friction caused by between the cable and the power distribution cabinet and have good sealing properties. In addition,  Ensuring the safe operation of the circuit.

Nylon Cable Gland Application advantages:

1. Convenient installation, reduce construction time.

2. lots of  types and specifications, suitable for various sizes of non-armoured cablesl.

3. Have a wide range of temperature: -20-100.

4. Keep the circuit unobstructed and cable sealed, and ensure the insulation level at the cable joint.

Comments

Post a Comment

Popular posts from this blog

Analysis of The Causes of Cable Insulation Breakdown and Preventive Measures

-
Image
We combine our experience in cable operation over the years with the application of solid Bauer edge theory to analyze the causes of insulation breakdown of power cables.  The purpose is to cast a brick to attract jade, and electrical counterparts to find specific measures to prevent cable insulation breakdown , improve the level of safe operation of the cable and extend the service life of the cable. I. Breakdown of Solid Insulation 1. Solid insulation breakdown of the form of insulation material is also known as dielectric. When the voltage applied to the dielectric exceeds a certain critical value, the electric field strength in the dielectric exceeds the level it can withstand. Through the dielectric current increases sharply, the dielectric rupture or decomposition, the complete loss of insulation capacity. This phenomenon is called dielectric breakdown. Different dielectric, the form, and mechanisms of breakdown are different, field dielectric breakdown can generally be divid...
Read more

Precautions for OPPC Cables During Transportation and Installation

-
Image
 For OPPC phase line fiber optic cable conductor, due to the existence of discharge, over the pulley, tightening the line caused by the structure elongation and operation of the temperature rise in the process of expansion elongation and creep elongation generated by plastic deformation, so the fiber residual length requirements are very strict. Fiber optic units should have good mechanical protection to ensure that the fiber is not extruded. To prevent moisture intrusion and affect the service life of the fiber, the fiber should be placed in a closed tube, or take other moisture-proof measures. Then OPPC phase line fiber optic cable wire in the transportation and installation process should pay attention to what issues? 1. The cable tray with fiber optic cable should be rolled in the direction indicated on the side of the plate. Rolling distance should not be too long, and generally should not exceed 20 meters, rolling should pay attention to prevent obstacles to damage the packa...
Read more

What are The Main Methods of Power Cable Withstand Voltage Test

-
Image
A cable withstand voltage test is a way to find faults in the presence of cables. It is easily affected by various factors during the test, resulting in problems such as failure and short circuits. The main methods of several cables to withstand voltage tests are described below. The First, Ultra-Low Frequency Withstand Voltage Test The ultra-low frequency (0.1Hz) withstand voltage test method first appeared in 1980. And it is mainly a non-destructive test method for observing whether there is an insulation defect in cable operation. And the method has been verified by a large number of laboratory tests and field tests.  The low-frequency withstand voltage test has a good application effect in the low-voltage power cable withstand voltage test. The method utilizes the principle of converting 50 Hz alternating current into direct current voltage through rectification and filtering.  And then converting the direct current voltage into an alternating current voltage of 1 kHz thro...
Read more